View NLAS4717EPMTR2G_1289399.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NLAS4717EP 4.5 W High Bandwidth, Dual SPDT Analog Switch
The NLAS4717EP is an advanced CMOS analog switch fabricated in sub-micron silicon gate CMOS technology. The device is a dual independent Single Pole Double Throw (SPDT) switch featuring low RDS(on) of 4.5 W at 3.0 V. The device also features guaranteed Break-Before-Make (BBM) switching, assuring the switches never short the driver. The NLAS4717EP is available in two small size packages: Microbump: 2.0 x 1.5 mm WQFN-10: 1.4 x 1.8 mm
Features http://onsemi.com MARKING DIAGRAMS
4717EP AYWWG G A1
A1 Microbump-10 CASE 489AA
* * * * * * * * * * * * * * *
Low RDS(on): 4.5 W @ 3.0 V Matching Between the Switches 0.5 W Wide Voltage Range: 1.8 V to 5.5 V High Bandwidth > 90 MHz 1.65 V to 5.5 V Operating Range Low Threshold Voltages on Pins 4 and 8 (CTRL Pins) Ultra-Low Charge Injection 6.0 pC Low Standby Current: ICC = 1.0 nA (Max) @ TA = 25C *OVT on Pins 4 and 8 (CTRL Logic Pins) These are Pb-Free Devices Cell Phones PDAs MP3s Digital Still Cameras USB 2.0 Full Speed (USB1.1) - 12 Mbps Compliant
A = Assembly Location Y = Year W, WW = Work Week G = Pb-Free Package (Note: Microdot may be in either location)
1 WQFN-10 CASE 488AQ
AWMG G
Typical Applications
AW = Specific Device Code M = Date Code G = Pb-Free Device (Note: Microdot may be in either location)
FUNCTION TABLE
IN_ 0 1 NO_ OFF ON NC_ ON OFF
Important Information
* ESD Protection:
* Latchup Max Rating: 200 mA (Per JEDEC EIA/JESD78) * Pin-to-Pin Compatible with MAX4717
*OVT
HBM = 2500 V, MM = 200 V
ORDERING INFORMATION
Device Package Shipping
* Overvoltage Tolerant (OVT) specific pins operate higher than normal
supply voltages, with no damage to the devices or to signal integrity.
3000 / NLAS4717EPFCT1G Microbump-10 Tape & Reel (Pb-Free) NLAS4717EPMTR2G WQFN-10 (Pb-Free) 3000 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
(c) Semiconductor Components Industries, LLC, 2006
1
March, 2006 - Rev. 5
Publication Order Number: NLAS4717EP/D
NLAS4717EP
NO1 GND B1 NC1 C1 A1 NC2 COM1 3 10 NO2 2 VCC 1
IN1 COM1 NO1
C2 C3 C4 B4 VCC Microbump (Top View)
A2 A3 A4
IN2 COM2
IN1
4
9
COM2
NC1 NO2
5 6 GND 7 NC2
8
IN2
WQFN (Top View)
Figure 1. Device Circuit Diagrams and Pin Configurations MAXIMUM RATINGS
Symbol V+ VIS VIN IIK IPK DC Supply Voltage Analog Input Voltage (VNO, VNC, or VCOM) (Note 1) Digital Select Input Voltage DC Current, Into or Out of Any Pin (Continuous) Peak Current (10% Duty Cycle) Parameter Value *0.5 to )7.0 *0.5 v VIS v VCC )0.5 *0.5 v VI v)7.0 $100 $200 Unit V V V mA mA
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Signal voltage on NC, NO, and COM exceeding VCC or GND are clamped by the internal diodes. Limit forward diode current to maximum current rating.
RECOMMENDED OPERATING CONDITIONS
Symbol V+ VIN VIS TA tr, tf DC Supply Voltage Digital Select Input Voltage Analog Input Voltage (NC, NO, COM) Operating Temperature Range Input Rise or Fall Time, SELECT VCC = 3.3 V $ 0.3 V VCC = 5.0 V $ 0.5 V Parameter Min 1.8 GND GND -40 0 0 Max 5.5 5.5 VCC +85 100 20 Unit V V V C ns/V
http://onsemi.com
2
NLAS4717EP
ANALOG SWITCH DC CHARACTERISTICS
-40C to +85C Symbol VIH Parameter Input Logic High Voltage Condition VOUT = 0.1 V IOUT 20 mA VIL Input Logic Low Voltage VOUT = -VCC - 0.1 V IOUT 20 mA IIN VCC ICC Input Leakage Current Power Supply Range Supply Current VIN = VCC or GND All VIN = VCC or GND IOUT = 0 mA VCC (V) 1.65 to 2.2 2.7 to 3.6 4.5 to 5.5 1.65 to 2.2 2.7 to 3.6 4.5 to 5.5 5.5 - 1.8 3.3 5.5 Min VCC x 0.55 VCC x 0.5 2.0 - - - -100 1.65 - - - Max - - - VCC x 0.2 VCC x 0.2 0.8 +100 5.5 1.0 1.0 1.0 nA V mA V Unit V
ANALOG SWITCH CHARACTERISTICS - Digital Section (Voltages Referenced to GND)
-40C to +85C Symbol RON Parameter ON Resistance (Note 2) Condition ICOM = 10 mA VIS = 0 to VCC VCC (V) 3.0 5.0 DRON ON Resistance Match Between Channels (Note 2 and 3) ICOM = 10 mA VIS = 0 to VCC 3.0 Min - - - Typ 3.2 2.1 0.1 Max 4.5 3.5 0.4 W Unit W
5.0 RFLAT[ON] ON Resistance Flatness (Note 4) ICOM = 10 mA VIS = 0 to VCC 5.0 INO_[OFF] INC_[OFF] NO_, NC_ Off-Leakage Current (Note 5) VCOM = 0.3 V or 3.3 V VNO or VNC = 0.3 V or 3.3 V VCOM = 0 V or 5.0 V VNO or VNC = 0 V or 5.0 V ICOM_[ON] COM_ On-Leakage Current (Note 5) VCOM = 0.3 V or 3.3 V VNO or VNC = 0.3 V or 3.3 V VCOM = 0 V or 5.0 V VNO or VNC = 0 V or 5.0 V 5.5 3.6 5.5 3.6 3.0
- -
0.1 1.12
0.4 1.5 W
- -1.0
0.55 0.01
1.36 +1.0 nA
-1.0
0.01
+1.0
-2.0
0.01
+2.0
nA
-2.0
0.01
+2.0
http://onsemi.com
3
NLAS4717EP
ANALOG SWITCH AC CHARACTERISTICS
-40C to +85C Symbol tON Parameter Turn-On Time Condition VNC_, VNO_ = VIH or VIL RL = 300 W, CL = 35 pF VIN[x] = VIH or VIL tOFF Turn-Off Time VNC_, VNO_ = VIH or VIL RL = 300 W, CL = 35 pF VIN[x] = VIH or VIL tBBM Break-Before-Make Time Delay (Note 5) Skew (Note 5) VNC_, VNO_ = 1.5 V RL = 300 W, CL = 35 pF RS = 39 W, CL = 50 pF - - 0.15 2.0 nS - - 8.0 - nS 1.8 to 5.5 - - 40 nS VCC (V) 1.8 to 5.5 Min - Typ - Max 30 Unit nS
tSKEW 2. 3. 4. 5.
RON characterized for VCC range (1.65 V to 5.5 V). DRON = RON(MAX) - RON(MIN). RFLAT[ON] = RON(MAX) - RON(MIN), measured over VCC range. Guaranteed by design.
ANALOG SWITCH APPLICATION CHARACTERISTICS
-40C to +85C Symbol Q Parameter Charge Injection Condition VIN = VCC to GND RIn = 0 W, CL = 1.0 nF Q = CL - DVOUT VISO Off-Isolation f = 10 MHz VNO_, VNC_ = 1.0 Vp-p RL = 50 W, CL = 5.0 pF f = 1.0 MHz VNO_, VNC_ = 1.0 Vp-p RL = 50 W, CL = 5.0 pF VCT Cross-Talk f = 10 MHz VNO_, VNC_ = 1.0 Vp-p RL = 50 W, CL = 5.0 pF f = 1.0 MHz VNO_, VNC_ = 1.0 Vp-p RL = 50 W, CL = 5.0 pF BW On-Channel -3.0 db Bandwidth Total Harmonic Distortion NO_, NC_ OFF-Capacitance NO_, NC_ ON-Capacitance Signal = 0 dB RL = 50 W, CL = 5.0 pF VCOM = 2.0 Vp-p, RL = 600 W, TA = 25C F = 1.0 MHz F = 1.0 MHz - - - 0.02 15 38 % pF pF 1.8 to 5.0 90 MHz -53 1.65 to 5.5 -35 dB -110 1.65 to 5.5 -70 dB VCC (V) 3.0 5.0 Min Typ 6.0 9.0 Max Unit pC
THD CNO_[OFF] CNC_[OFF] CNO_[ON] CNC_[ON]
http://onsemi.com
4
NLAS4717EP
2.0 3.0 2.5 2.0 1.5 1.0 0.5 0.5 0.0 0.0 0.0 0.0 +85C +25C -40C
+85C 1.5 RDS(on) (W) RDS(on) (W) +25C 1.0 -40C
1.0
2.0 VCOM (V)
3.0
4.0
5.0
0.5
1.0
1.5 VCOM (V)
2.0
2.5
3.0
Figure 2. RDS(on) @ VCC = 5.0 V
Figure 3. RDS(on) @ VCC = 3.0 V
1.5 1.4 1.3 RDS(on) (W) 1.2 1.1 1.0 0.9 0.8 -40C 5.0 V RDS(on) (W)
1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 -40C 3.0 V
+25C TEMPERATURE (C)
+85C
+25C TEMPERATURE (C)
+85C
Figure 4. Delta RDS(on) @ VCC = 5.0 V
Figure 5. Delta RDS(on) @ VCC = 3.0 V
8 6 4 2 Q (cP) 0 -2 -4 -6 -8 -10 0.0 3.0 V 5.0 V THD (%)
1
0.1
3.0 V 0.01 1.0 2.0 VCOM (V) 3.0 4.0 5.0 10 100 1000 FREQUENCY (Hz) 10000 100000
Figure 6. Charge Injection
Figure 7. Total Harmonic Distortion
http://onsemi.com
5
NLAS4717EP
20 0 -20 -40 (dB) -60 -80 -100 -120 -140 0.001 OFF-Isolation VCC = 3.0 V to 5.0 V TA = -40C to +85C 0.1 1 (MHz) 10 100 0.1 1 10 (MHz) 100 1000 Cross-Talk VCC = 1.65 V to 5.5 V (dB) 10 0 Bandwidth -3 dB
-10 degress
0 Phase -30 deg
-45
0.01
Figure 8. Frequency Response
Figure 9. Bandwidth and Phase
http://onsemi.com
6
NLAS4717EP
DUT VCC 0.1 mF 300 W Output VOUT 35 pF 90% Output Input GND tBMM 90% of VOH VCC
Switch Select Pin GND
Figure 10. tBBM (Time Break-Before-Make)
VCC DUT VCC 0.1 mF Open Output VOUT 300 W 35 pF Output VOL Input tON tOFF Input 0V VOH 90% 90% 50% 50%
Figure 11. tON/tOFF
VCC DUT Output Open 300 W VOUT 35 pF Input
VCC 50% 0V VOH Output VOL 10% 10% 50%
Input
tOFF
tON
Figure 12. tON/tOFF
http://onsemi.com
7
NLAS4717EP
50 W Reference Input Output 50 W Generator 50 W DUT Transmitted
Channel switch control/s test socket is normalized. Off isolation is measured across an off channel. On loss is the bandwidth of an On switch. VISO, Bandwidth and VONL are independent of the input signal direction. VISO = Off Channel Isolation = 20 Log VONL = On Channel Loss = 20 Log VOUT VIN for VIN at 100 kHz
VOUT VIN
for VIN at 100 kHz to 50 MHz
Bandwidth (BW) = the frequency 3.0 dB below VONL VCT = Use VISO setup and test to all other switch analog input/outputs terminated with 50 W
Figure 13. Off Channel Isolation/On Channel Loss (BW)/Crosstalk (On Channel to Off Channel)/VONL
DUT Open Output VIN
VCC GND CL Output Off Off DVOUT
VIN
On
Figure 14. Charge Injection: (Q)
http://onsemi.com
8
NLAS4717EP
PACKAGE DIMENSIONS
Microbump-10 CASE 489AA-01 ISSUE A
4X
D 0.10 C
PIN ONE CORNER
A
B
E
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. COPLANARITY APPLIES TO SPHERICAL CROWNS OF SOLDER BALLS. MILLIMETERS DIM MIN MAX A --- 0.650 A1 0.210 0.270 A2 0.280 0.380 D 1.965 BSC E 1.465 BSC b 0.250 0.350 e 0.500 BSC D1 1.500 BSC E1 1.000 BSC
A1 0.10 C A2 0.075 C A C
SEATING PLANE
D1 e
10 X
b
C B A 1 2 3 4
0.15 C A B 0.05 C
E1 e
http://onsemi.com
9
NLAS4717EP
PACKAGE DIMENSIONS
WQFN10, 1.4x1.8x0.4P CASE 488AQ-01 ISSUE B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. 5. EXPOSED PADS CONNECTED TO DIE FLAG. USED AS TEST CONTACTS. DIM A A1 A3 b D E e L L1 MILLIMETERS MIN MAX 0.70 0.80 0.00 0.050 0.20 REF 0.15 0.25 1.40 BSC 1.80 BSC 0.40 BSC 0.30 0.50 0.40 0.60
D
A
PIN 1 REFERENCE 2X
0.15 C 0.15 C
2X
0.10 C 0.08 C A1 A3
3 9XL 6 1 5
L1
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.
EE EE
e
10 10 X
E
B A
SEATING PLANE
C
MOUNTING FOOTPRINT
1.700 0.0669 0.663 0.0261 0.200 0.0079
1 9X
e/2 0.563 0.0221
b
0.10 C A B 0.05 C
NOTE 3
2.100 0.0827 0.400 0.0157 PITCH
10 X
0.225 0.0089
SCALE 20:1
mm inches
http://onsemi.com
10
NLAS4717EP/D

▲Up To Search▲

Price & Availability of NLAS4717EPMTR2G

	To Download NLAS4717EPMTR2G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .